LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Spark LT, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Diagnostic Information and Procedures >> DTC B3881 or B3882: Tail Lamp Circuit >> Circuit/System Description

Circuit/System Description

The brake pedal position (BPP) sensor is used to sense the action of the driver application of the brake pedal. The BPP sensor provides an analog voltage signal that will increase as the brake pedal is applied. The body control module (BCM) provides a low reference signal and a 5-volt reference voltage to the BPP sensor. When the variable signal reaches a voltage threshold indicating the brakes have been applied, the BCM will apply battery voltage to the left and right stop lamp control circuits as well as the center high mounted stop lamp (CHMSL) control circuit illuminating the left and right stop lamps and the CHMSL.

scientia non olet · About LEMON Manuals