Battery Tray Replacement

Fig 1: Battery Tray & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the battery. Refer to Battery Replacement (Without Start/Stop) , Battery Replacement (With Start/Stop) . Remove the engine control module. Refer to Engine Control Module Replacement (LTG) , Engine Control Module Replacement (LKW) , for the 2.0L engine or Engine Control Module Replacement for the 2.2L or 2.4L engine .
1	Battery Tray Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 20 N.m (15 lb ft)
2	Battery Tray TIP: Unclip harnesses as necessary.

Callout

Component Name

Preliminary Procedure

Battery Tray Bolt (Qty: 3)

CAUTION:

Tighten
20 N.m (15 lb ft)

Battery Tray
TIP: Unclip harnesses as necessary.