LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Intake Valve Rocker Arm Replacement (LKW) >> Installation Procedure

Installation Procedure

    Fig 1: Valve Tips
    GM1825091Courtesy of GENERAL MOTORS COMPANY
  1. Lubricate the valve tips. Refer to Adhesives, Fluids, Lubricants, and Sealers (LKW) .
    2. Fig 2: Intake Valve Rocker Arms (LKW)
    GM3337308Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Used rocker arms must be returned to the original position on the camshaft. If the camshaft is being replaced, the rocker arms actuated by the camshaft must also be replaced.
    • Pre-oil roller bearings before installation.
  2. Lubricate the roller bearings with valve rocker arm lubricant. Refer to Adhesives, Fluids, Lubricants, and Sealers (LKW) .
  3. Position the valve rocker arm (1) on the tip of the valve stem and on the lash adjuster and lubricate. Refer to Adhesives, Fluids, Lubricants, and Sealers (LKW) .
  4. Install the intake camshaft. Refer to Intake Camshaft Replacement (LKW) .
scientia non olet · About LEMON Manuals