LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Intake Manifold Replacement (LKW) >> Removal Procedure

Removal Procedure

  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LKW) .
    2. Fig 1: PCV Pipe
    GM2815534Courtesy of GENERAL MOTORS COMPANY
  2. Remove the PCV pipe (1). Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (Camshaft Cover to Air Cleaner Resonator to Outlet Duct) , Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LKW) .
    3. Fig 2: Brake Vacuum Pipe
    GM2815535Courtesy of GENERAL MOTORS COMPANY
  3. Remove the brake vacuum pipe (1). Refer to Power Brake Booster Vacuum Pipe Replacement (LTG, LKW) .
    4. Fig 3: EVAP Canister Valve
    GM2726730Courtesy of GENERAL MOTORS COMPANY
  4. Remove the EVAP canister valve (1).
  5. Remove the throttle body. Refer to Throttle Body Assembly Replacement (LKW) .
  6. Remove the fuel pump. Refer to Fuel Injection Fuel Rail Assembly Replacement .
    7. Fig 4: Intake Bolts
    GM2815536Courtesy of GENERAL MOTORS COMPANY
  7. Remove the intake bolts (1).
  8. Remove the intake manifold (2) from the vehicle.
    9. Fig 5: Intake Manifold Gasket
    GM2815742Courtesy of GENERAL MOTORS COMPANY
  9. Remove the intake manifold gasket (1) and DISCARD.
  10. For intake manifold cleaning and inspection. Refer to Intake Manifold Cleaning and Inspection .
scientia non olet · About LEMON Manuals