LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Camshaft Position Intake Actuator Replacement (LKW) >> Removal Procedure

Removal Procedure

  1. Remove the timing chain. Refer to Camshaft Timing Chain and Tensioner Replacement .
    2. Fig 1: Camshaft Position Intake Actuator & Bolt (LKW)
    GM3336964Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Install an open-end wrench to the camshaft flats located on the intake camshaft.
    • While holding the open-face wrench steady loosen the camshaft actuator bolt.
  2. Remove and DISCARD the bolt (1) and remove the actuator (2).
scientia non olet · About LEMON Manuals