Exhaust Manifold Heat Shield Replacement (LUK)
Exhaust Manifold Heat Shield Replacement (LUK)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement . |
|
| 1 | Exhaust Manifold Heat Shield Fastener (Qty 3)
WARNING:
Refer to Hot Exhaust System Warning .
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |
| 2 | Exhaust Manifold Heat Shield |