Turbocharger Wastegate Actuator Replacement (LTG)
Turbocharger Wastegate Actuator Replacement (LTG)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the turbocharger heat shield. Refer to Turbocharger Heat Shield Replacement . |
|
| 1 | Turbocharger Wastegate Actuator Arm Retainer |
| 2 | Turbocharger Wastegate Actuator Fastener (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 20 (15 lb ft) |
| 3 | Turbocharger Wastegate Actuator Procedure Disconnect the vacuum line from the turbocharger wastegate actuator. |