Instrument Panel Driver Knee Bolster Pad Replacement

Fig 1: Instrument Panel Driver Knee Bolster Pad

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Instrument Panel Driver Knee Bolster Pad Assembly Procedures Use a flat bladed plastic trim tool in order to release the retainer clips securing the driver knee bolster pad to the instrument panel assembly. Disconnect electrical connections. When replacing the instrument panel driver knee bolster pad, transfer all necessary components.

Callout

Component Name

Instrument Panel Driver Knee Bolster Pad Assembly

Procedures

Use a flat bladed plastic trim tool in order to release the retainer clips securing the driver knee bolster pad to the instrument panel assembly.
Disconnect electrical connections.
When replacing the instrument panel driver knee bolster pad, transfer all necessary components.