Front Floor Console Assembly Replacement

Fig 1: Front Floor Console Assembly & Mounting Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the instrument panel trim plate. Refer to Instrument Panel Trim Plate Replacement . Remove the front floor console rear trim panel. Refer to Front Floor Console Rear Trim Panel Replacement
1	Front Floor Console Rear Side Cover (Qty: 2) Procedure Remove the plastic fastener covers in order to gain access to the rear fasteners.
2	Front Floor Console Rear Side Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 6 (53 lb in)
3	Front Floor Console Fastener (Qty: 4) Tighten 2.5 (22 lb in)
4	Front Floor Console Assembly Procedure Disconnect the electrical harnesses and connectors. When replacing the front floor console assembly, transfer all necessary components. NOTE: Depending on option content, it may be required to remove the right lower instrument panel support brace in order to easily access the electrical connections.