LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Impala LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> DTC P0521, P0522, or P0523: Engine Oil Pressure Sensor >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Engine Oil Pressure Sensor parameter is 0 psi (0 kPa).
    • If not 0 psi (0 kPa) 

      refer to Circuit/System Testing (below).

    • If 0 psi (0 kPa) 
  3. Engine running.
  4. Verify actual engine oil pressure is within specified range. Refer to Oil Pressure Diagnosis and Testing  in Displays and Gauges Component Replacement Reference .
  5. Verify the scan tool Engine Oil Pressure parameter is within specified range.
    • If not within specified range 

      refer to Circuit/System Testing (below).

    • If within specified range 
  6. Verify the engine oil pressure displayed on Instrument Cluster is within specified range.
    • If not within specified range 

      Test or replace the P16 Instrument Cluster.

    • If within specified range 
  7. All OK.
scientia non olet · About LEMON Manuals