Body Side Rear Window Garnish Molding Replacement

Fig 1: Body Side Rear Window Garnish Molding

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat belt guide trim cover. Refer to Rear Seat Belt Guide Trim Cover Replacement .
1	Body Side Rear Window Garnish Molding Assembly Procedure The tether clip at the upper portion of the garnish molding MUST be replaced every time the body side rear window garnish molding is removed. Pull outward from the lower front to release the lower portion of the molding, then move upward to release the tabs. Release the tether to remove.

Callout

Component Name

Preliminary Procedure
Remove the rear seat belt guide trim cover. Refer to Rear Seat Belt Guide Trim Cover Replacement .

Body Side Rear Window Garnish Molding Assembly

Procedure

The tether clip at the upper portion of the garnish molding MUST be replaced every time the body side rear window garnish molding is removed.
Pull outward from the lower front to release the lower portion of the molding, then move upward to release the tabs.
Release the tether to remove.