K20 Engine Control Module X2 (LU3)

Connector Part Information

Harness Type: Engine
OEM Connector: 13580811
Service Connector: 88988372
Description: 73-Way F MX123 34566 Series (L-GY)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray	Core Crimp	Insulation Crimp
I	Pins: 4-5, 6-13, 16, 20, 30-33, 35-39, 41, 43, 45-46, 48-51, 54, 58, 65-66, 68, 70-71 - 13575575	J-35616-64B (L-BU)	J-38125-213	Pins: 4-5, 6-13, 16, 20, 30-33, 35-39, 41, 43, 45-46, 48-51, 54, 58, 65-66, 68, 70-71 - 33467-0005	23	Pins: 4-5, 13, 20, 33, 35-39, 41, 45-46, 48-51, 54, 58, 65-66, 68, 70-71 - K	K
II	Pending	J-35616-35 (VT)	J-38125-11A	7116-4152-02	9	A	5

K20 Engine Control Module X2 (LU3)

Pin	Size	Color	Circuit	Function	Terminal Type ID	Option
1-3	-	-	-	Not Occupied	-	-
4	0.5	TN	2761	Low Reference	I	-
5	0.35	GY/BK	6272	Low Reference	I	-
6	0.5	TN	1744	Fuel Injector 1 Control	I	-
7	0.5	YE/BK	846	Fuel Injector 6 Control	I	-
8	0.5	TN/WH	845	Fuel Injector 5 Control	I	-
9	0.5	BN	2129	Low Reference	I	-
10	0.5	L-BU/BK	844	Fuel Injector 4 Control	I	-
11	0.5	PK/BK	1746	Fuel Injector 3 Control	I	-
12	0.5	L-GN/BK	1745	Fuel Injector 2 Control	I	-
13	0.5	GY	2704	5-Volt Reference 1	I	-
14-15	-	-	-	Not Occupied	-	-
16	0.5	YE	581	Throttle Actuator Control Motor Control - 1	I	-
17-19	-	-	-	Not Occupied	-	-
20	0.35	BN	6266	Low Reference	I	-
21	-	-	-	Not Occupied	-	-
22	0.5	PU	2121	Ignition Coil 1 Control	-	-
23	0.5	L-BU	2123	Ignition Coil 3 Control	-	-
24	0.5	OG/WH	2122	Ignition Coil 2 Control	-	-
25-29	-	-	-	Not Occupied	-	-
30	0.5	D-GN/WH	428	Evaporative Emission (EVAP) Canister Purge Solenoid Control	I	-
31	0.5	OG	225	Generator Turn On Signal	I	-
32	0.5	BN	582	Throttle Actuator Control Motor Control - 2	I	-
33	0.35	D-BU	6259	5-Volt Reference 1	I	-
34	-	-	-	Not Occupied	-	-
35	0.35	GY	2705	5-Volt Reference 1	I	-
36	0.35	TN/WH	331	Oil Pressure Sensor Signal	I	-
37	0.8	PU/WH	1665	Heated Oxygen Sensor (HO2S) High Signal - Bank 1 Sensor 1	I	-
38	0.8	PU	1666	Heated Oxygen Sensor (HO2S) High Signal - Bank 2 Sensor 1	I	-
39	0.5	L-GN	432	Manifold Absolute Pressure (MAP) Sensor Signal	I	-
40	0.35	TN	2752	Low Reference	I	-
41	0.35	BK	2755	Low Reference	I	-
42	-	-	-	Not Occupied	-	-
43	0.5	GY	23	Generator Field Duty Cycle Signal	I	-
44	-	-	-	Not Occupied	-	-
45	0.35	WH/BK	6271	Crankshaft Position (CKP) Sensor Signal	I	-
46	0.35	D-BU/WH	6265	Camshaft Position (CMP) Sensor Signal	I	-
47	-	-	-	Not Occupied	-	-
48	0.8	TN	1664	Heated Oxygen Sensor (HO2S) Low Signal - Bank 1 Sensor 1	I	-
49	0.5	OG/BK	469	Low Reference	I	-
50	0.5	GY	1716	Knock Sensor (KS) 1 Signal	I	-
51	0.5	D-BU	496	Knock Sensor (KS) 1 Signal	I	-
52	-	-	-	Not Occupied	-	-
53	0.35	GY	2701	5-Volt Reference 2	I	-
54	0.35	PU/WH	6270	5-Volt Reference 2	I	-
55-56	-	-	-	Not Occupied	-	-
57	0.35	D-GN	485	Throttle Position (TP) Sensor 1 Signal	I	-
58	0.5	YE	410	Engine Coolant Temperature (ECT) Sensor Signal	I	-
59	0.35	PU	486	Throttle Position (TP) Sensor 2 Signal	I	-
60-64	-	-	-	Not Occupied	-	-
65	0.8	GY/WH	3113	Heated Oxygen Sensor (HO2S) Heater Low Control - Bank 1 Sensor 1	I	-
66	0.8	L-GN	3212	Heated Oxygen Sensor (HO2S) Heater Low Control - Bank 2 Sensor 1	I	-
67	-	-	-	Not Occupied	-	-
68	0.8	TN	1667	Heated Oxygen Sensor (HO2S) Low Signal - Bank 2 Sensor 1	I	-
69	-	-	-	Not Occupied	-	-
70	0.5	GY	2303	Knock Sensor (KS) 2 Signal	I	-
71	0.5	L-BU	1876	Knock Sensor (KS) 2 Signal	I	-
72	-	-	-	Not Occupied	-	-
73	3	BK/WH	1551	Ground	-	-