LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Express 1500 LS, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Replacement >> Removal Procedure

Removal Procedure

    CAUTION:

    Refer to Apply Tape When Removing Body Panel Caution .

  1. Apply tape to panels to be removed.
  2. Remove the right and the left air inlet grille panels from the vehicle. Refer to Air Inlet Grille Panel Replacement .
  3. Remove the hood from the vehicle. Refer to Hood Replacement .
  4. Remove the upper fender filler panel from the vehicle. Refer to Windshield Frame Filler Panel Applique Replacement .
    5. Fig 1: Front Fender, Bolts & Rivets
    GM314972Courtesy of GENERAL MOTORS COMPANY
  5. Remove the front fender extension from the vehicle. Refer to Front Fender Extension Replacement .
  6. Remove the front bumper from the vehicle. Refer to Front Bumper Replacement .
  7. Drill out the rivets (1) retaining the front fender (2) to the front door hinges.
  8. Remove the bolts (3) retaining the front fender (2) to the body.
  9. Remove the hood rod support from the left fender. Refer to Hood Hold-Open Rod Replacement 
  10. Remove the front fender (2) from the vehicle.
scientia non olet · About LEMON Manuals