LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Express 1500 LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L (L20), 5.3L (LMF), Or 6.0L (L96 LC8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the retaining bolt for the coolant recovery reservoir and set the reservoir aside.
    3. Fig 1: View Of Oil Level Indicator, Tube Bolt, Indicator Tube & O-Ring Seal
    GM1658141Courtesy of GENERAL MOTORS COMPANY
  3. Remove the oil level indicator (418).
  4. Remove the oil level indicator tube bolt (419).
  5. Remove the oil level indicator tube (420) from the engine block.
    6. NOTE:

    The O-ring may be reused if not cut or damaged.

  6. Inspect the O-ring seal for cuts or damage.
  7. Remove the O-ring seal (421) from the tube, if required.
scientia non olet · About LEMON Manuals