LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Express 1500 LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L (L20), 5.3L (LMF), Or 6.0L (L96 LC8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Oil Pressure Sensor and/or Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Oil Pressure Sensor
    GM260089Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Apply sealant to the threads of the oil pressure sensor. Refer to Adhesives, Fluids, Lubricants and Sealers for the correct part number.
  2. Using J 41712  Oil Pressure Sensor Socket or equivalent, install the oil pressure sensor and tighten to 35 N.m (26 lb ft).
    3. Fig 2: View Of Oil Pressure Sensor & CMP Sensor Connectors
    GM684224Courtesy of GENERAL MOTORS COMPANY
  3. Connect the oil pressure sensor electrical connector (1).
  4. Install the engine cover. Refer to Engine Cover Replacement .
scientia non olet · About LEMON Manuals