LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Express 1500 LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L (L20), 5.3L (LMF), Or 6.0L (L96 LC8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Mount Replacement - Right Side >> Removal Procedure

Removal Procedure

    Fig 1: Engine Mount To Engine Mount Bracket Bolts
    GM829685Courtesy of GENERAL MOTORS COMPANY
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the starter. Refer to Starter Replacement (V8) .
  3. Remove the right side exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (V8) .
  4. Remove the engine mount to the frame mounting bolts.
  5. CAUTION:

    When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal or crankshaft balancer. Jacking against the oil pan may cause it to crack or break.

    NOTE:

    Raise the engine only enough to permit removal of the engine mount.

  6. Raise and suitably support the engine using adjustable (screw type) jackstands.
  7. Fig 2: Engine Mount To Engine Mounting Bolts
    GM829673Courtesy of GENERAL MOTORS COMPANY
  8. Remove the engine mount to the engine mounting bolts.
  9. Remove the engine mount from the vehicle.