LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Express 1500 LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L (L20), 5.3L (LMF), Or 6.0L (L96 LC8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Cylinder Head Replacement - Left Side >> Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
  2. Remove the generator bracket. Refer to Generator Replacement (V8) .
  3. Remove the coolant air bleed pipe. Refer to Engine Coolant Air Bleed Pipe Replacement (V8) .
  4. Remove the left exhaust manifold. Refer to Exhaust Manifold Replacement - Left Side (V8) .
  5. Remove the pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
    6. Fig 1: View Of Left Cylinder Head
    GM1424500Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The cylinder head bolts are NOT reusable.

  6. Remove the cylinder head bolts.
    7. CAUTION:

    After removal, place the cylinder head on 2 wood blocks in order to prevent damage to the sealing surfaces.

  7. Remove the cylinder head.
    8. Fig 2: View Of Left Cylinder Head Gasket & Locator Pins
    GM63169Courtesy of GENERAL MOTORS COMPANY
  8. Remove the cylinder head gasket.
  9. Discard the gasket.
  10. Discard the cylinder head bolts.
  11. Clean and inspect the cylinder head. Refer to Cylinder Head Cleaning and Inspection .
scientia non olet · About LEMON Manuals