LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Express 1500 LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L (L20), 5.3L (LMF), Or 6.0L (L96 LC8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Engine Flywheel & Bolt
    GM178458Courtesy of GENERAL MOTORS COMPANY
  1. Remove the automatic transmission, if equipped. Refer to Transmission Replacement , for the 4L60-E transmission or Transmission Replacement for the 6L45/6L50/6L80/6L90 transmission.
    2. NOTE:

    Note the position and direction of the engine flywheel before removal.

  2. Remove the engine flywheel bolts.
  3. Remove the automatic transmission engine flywheel.
  4. Clean and inspect the engine flywheel.
  5. Install 2 M11x1.5 mm bolts to the threaded holes of the spacer, if applicable.
  6. Rotate the bolts clockwise to remove the spacer.
    7. Fig 2: View Of Spacer & Crankshaft Rear
    GM642276Courtesy of GENERAL MOTORS COMPANY
  7. Remove the spacer from the rear of the crankshaft, if applicable.
scientia non olet · About LEMON Manuals