LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Express 1500 LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.8L (L20), 5.3L (LMF), Or 6.0L (L96 LC8) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Air Conditioning Compressor Belt Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing Belt
    GM1987654Courtesy of GENERAL MOTORS COMPANY
  1. Remove the accessory belt. Refer to Drive Belt Replacement - Accessory .
  2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement .
  3. Cut the belt (1) from the air conditioning (A/C) and crankshaft pulleys.
    4. Fig 2: View Of CMP Sensor Wire Harness & Bolts
    GM1658163Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the engine wiring harness electrical connector from the CMP sensor wiring harness.
  5. Remove the CMP sensor wire harness fasteners (738).
  6. Disconnect the CMP sensor wire harness connectors from the CMP sensor and the CMP actuator magnet.
  7. Remove the CMP sensor wire harness (737).
scientia non olet · About LEMON Manuals