Hood Primary and Secondary Latch Replacement

Fig 1: Hood Primary Latch and Hood Secondary Latch

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . Remove the radiator grille support reinforcement. Refer to Front Grille Support Replacement .
1	Hood Primary and Secondary Latch Retainer Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 22 (16 lb ft)
2	Hood Primary and Secondary Latch Procedure To release the hood primary and secondary latch unhook the hood primary latch release cable. Disconnect electrical connectors as needed.

Callout

Component Name

Preliminary Procedures

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
Remove the radiator grille support reinforcement. Refer to Front Grille Support Replacement .

Hood Primary and Secondary Latch Retainer Bolt (Qty: 2)

CAUTION:

Tighten
22 (16 lb ft)

Hood Primary and Secondary Latch

Procedure

To release the hood primary and secondary latch unhook the hood primary latch release cable.
Disconnect electrical connectors as needed.