LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Cruze Diesel >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LUZ) Diesel - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Oil Pressure Sensor Replacement

Engine Oil Pressure Sensor Replacement

Fig 1: Oil Pressure Sensor
GM2512731Courtesy of GENERAL MOTORS COMPANY
Engine Oil Pressure Sensor Replacement

Callout Component Name

Preliminary Procedures

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .
  4. Remove the engine oil cooler outlet hose. Refer toEngine Oil Cooler Outlet Hose Replacement (2.0L Diesel LUZ) .
  5. Disconnect the engine oil pressure sensor wiring harness plug.
1 Engine Oil Pressure Sensor
CAUTION:

Refer to Fastener Caution .


Tighten 
35 (26 lb ft)
scientia non olet · About LEMON Manuals