LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Valve Lifter Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the applicable camshaft (s). Refer to Camshaft Replacement - Right Side .
  2. Remove the rocker arms. Refer to Valve Rocker Arm Removal - Right Side .
    3. Fig 1: View Of Stationary Hydraulic Lash Adjuster (SHLAs)
    GM902901Courtesy of GENERAL MOTORS COMPANY
  3. Remove the lifters. Refer to Valve Lifter Removal - Right Side .
  4. Clean and inspect the camshaft (s) and the rocker arm (s) and lifters. Repair or replace as necessary. Refer to Camshaft Cleaning and Inspection , and Valve Lifter Cleaning and Inspection , and Valve Rocker Arm Cleaning and Inspection .
scientia non olet · About LEMON Manuals