LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Valve Lifter Replacement - Left Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Stationary Hydraulic Lash Adjuster (SHLA)
    GM946248Courtesy of GENERAL MOTORS COMPANY
  1. Install the lifters. Refer to Valve Lifter Installation - Left Side .
  2. Install the rocker arms. Refer to Valve Rocker Arm Replacement - Left Side .
  3. Install the applicable camshafts. Refer to Camshaft Replacement - Left Side .