LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Primary Timing Chain Guide Replacement - Lower >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Primary Camshaft Drive Chain Lower Guide Bolts
    GM1579007Courtesy of GENERAL MOTORS COMPANY
  1. Position the primary camshaft drive chain lower guide to the oil pump.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the primary camshaft drive chain lower guide bolts and tighten to 23 N.m (17 lb ft).
  3. Install the primary camshaft drive chain tensioner. Refer to Primary Camshaft Intermediate Drive Chain Tensioner Replacement .
scientia non olet · About LEMON Manuals