LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Primary Camshaft Intermediate Drive Chain Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Primary Camshaft Drive Chain Tensioner
    GM902847Courtesy of GENERAL MOTORS COMPANY
  1. Remove the engine front cover. Refer to Engine Front Cover Replacement .
    2. NOTE:

    If the entire camshaft timing system is not in Stage 2, Timing Chain Alignment Diagram , mark the timing chain and sprockets in order to ensure proper reassembly.

  2. Remove the primary camshaft drive chain tensioner. Refer to Camshaft Timing Chain Components Removal .
scientia non olet · About LEMON Manuals