LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Positive Crankcase Ventilation Hose/Pipe/Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: PCV Dirty Air Tube
    GM2667575Courtesy of GENERAL MOTORS COMPANY
  1. Install the PCV dirty air tube (1) to the intake manifold.
  2. Install the PCV dirty air tube (1) to the right camshaft cover.
  3. Fig 2: PCV Fresh Air Tube
    GM2667522Courtesy of GENERAL MOTORS COMPANY
  4. Install the PCV fresh air tube (1) to the air inlet.
  5. Install the PCV fresh air tube (1) to the left camshaft cover.
  6. Fig 3: Intake Manifold Cover & Retainers
    GM2667617Courtesy of GENERAL MOTORS COMPANY
  7. Install the rear intake manifold cover (2).
  8. Install the two rear intake manifold cover retainers (1).
  9. Fig 4: Intake Manifold Cover & Cap
    GM2667623Courtesy of GENERAL MOTORS COMPANY
  10. Install the intake manifold cover (2). Refer to Intake Manifold Cover Replacement - Front .