LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Oil Pump Suction Pipe and Screen Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil pan. Refer to Oil Pan Replacement .
    2. Fig 1: View Of Oil Pan Scraper And Bolts
    GM1210963Courtesy of GENERAL MOTORS COMPANY
  2. Remove the oil pan scraper bolts.
  3. Remove the oil pan scraper.
    4. Fig 2: View Of Oil Suction Pipe
    GM1210965Courtesy of GENERAL MOTORS COMPANY
  4. Remove the oil suction pipe bolts.
  5. Remove the oil suction pipe.
    6. Fig 3: View Of Oil Suction Tube Seal & Oil Suction Tube
    GM1318091Courtesy of GENERAL MOTORS COMPANY
  6. Remove the oil suction tube seal from the oil suction tube. Discard the oil suction tube seal.
scientia non olet · About LEMON Manuals