LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Support Fixture >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Loosen and remove the J 28467-81  kit.
    2. Fig 1: Main Bar
    GM2210887Courtesy of GENERAL MOTORS COMPANY
  2. Remove the J 28467-81  kit (1).
    3. Fig 2: Identifying Lift Hook Assembly To Left Side Engine Lift Hook Bracket
    GM1984848Courtesy of GENERAL MOTORS COMPANY
  3. Remove the engine brackets from the cylinder heads.
  4. Install the hood support strut.
  5. Install the engine cover. Refer to Intake Manifold Cover Replacement - Rear .
scientia non olet · About LEMON Manuals