LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Oil Pressure Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
    2. Fig 1: Oil Pressure Sensor Electrical Connector
    GM2658859Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the oil pressure sensor electrical connector.
  3. Remove the oil pressure sensor (1).
scientia non olet · About LEMON Manuals