LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical - 3.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View of Crankshaft Front Oil Seal Assembly
    GM1211008Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces.

  1. Use the J 29184  oil seal installer or equivalent to install the crankshaft front oil seal.
  2. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
scientia non olet · About LEMON Manuals