LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.6L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Left Exhaust Manifold Upper Insulator
    GM1370534Courtesy of GENERAL MOTORS COMPANY
  1. Remove the left exhaust manifold upper insulator from the oil level indicator tube.
    2. Fig 2: View Of Left Exhaust Manifold Heat Shield
    GM945895Courtesy of GENERAL MOTORS COMPANY
  2. Remove the left exhaust manifold heat shield bolts.
  3. Remove the left exhaust manifold heat shield.
    4. Fig 3: View Of Left Exhaust Manifold Lower Insulator
    GM1370532Courtesy of GENERAL MOTORS COMPANY
  4. Remove the left exhaust manifold lower insulator from the oil level indicator tube.
    5. Fig 4: View Of Oil Level Indicator Tube
    GM902882Courtesy of GENERAL MOTORS COMPANY
  5. Remove the oil level indicator tube bracket bolt.
  6. Remove the oil level indicator and tube by sliding the tube out from the lower crankcase hole.
    7. Fig 5: View Of Oil Level Indicator Tube O-Ring
    GM1583980Courtesy of GENERAL MOTORS COMPANY
  7. Remove and discard the O ring from the oil level indicator tube if damaged.
scientia non olet · About LEMON Manuals