LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.6L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Fuel Pump Removal

Fuel Pump Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Rail Noise Shield
    GM2202030Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel rail noise shield (1).
    2. Fig 2: Identifying Fuel Feed Pipe Components
    GM2202031Courtesy of GENERAL MOTORS COMPANY
  2. Remove the fuel rail wiring connectors from the fuel feed pipe bracket.
  3. Remove the fuel feed pipe bolts (1).
  4. Remove and discard the fuel feed pipe (2).
    5. Fig 3: Identifying High Pressure LH To RH Fuel Rail Crossover Pipe
    GM2202032Courtesy of GENERAL MOTORS COMPANY
  5. Remove and discard the high pressure LH to RH fuel rail crossover pipe (1).
    6. Fig 4: Identifying High Pressure Fuel Pump Components
    GM2202039Courtesy of GENERAL MOTORS COMPANY
  6. Remove and discard high pressure fuel pump bolts (1).
  7. Remove the high pressure fuel pump (2).
  8. Remove the valve lifter follower (3).
  9. Remove and discard the high pressure fuel pump gasket (4).
  10. Remove and discard the high pressure fuel pump O-ring (5).
scientia non olet · About LEMON Manuals