Engine Front Cover Disassemble

Special Tools 

EN 45000  Seal Remover

For equivalent regional tools, refer to Special Tools

Fig 1: Identifying Crankshaft Front Oil Seal & Removal Tool
Courtesy of GENERAL MOTORS COMPANY
1. Remove the crankshaft front oil seal from the engine front cover using the EN 45000  remover.
Fig 2: View Of Camshaft Position Actuator Valve Oil Seals
Courtesy of GENERAL MOTORS COMPANY
2. Remove the camshaft position actuator valve oil seals from the engine front cover.
Fig 3: Identifying Water Pump Seal
Courtesy of GENERAL MOTORS COMPANY
3. Remove the water pump seal from the engine front cover.
4. Discard the water pump seal.