LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.6L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Engine Flywheel Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Clean the flex plate in solvent.
  2. WARNING:

    Refer to Safety Glasses Warning .

  3. Dry the flex plate with compressed air.


    NOTE:

    In order to maintain the proper component balance, contact surface taper and heat transfer, manual transmission flywheels are NOT to be machined.

  1. Clean the engine flywheel in solvent.
  2. WARNING:

    Refer to Safety Glasses Warning .

  3. Dry the engine flywheel with compressed air.