LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.6L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Cylinder Head Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove any old thread sealant, gasket material or sealant using EN 28410  remover.
  2. Clean all cylinder head surfaces with noncorrosive solvent.
    3. WARNING:

    Refer to Safety Glasses Warning .

  3. Blow out all the oil galleries using compressed air.
  4. Remove any carbon deposits from the combustion chambers using the GE 8358  brush.
  5. Clean any debris or buildup from the lifter pockets.
scientia non olet · About LEMON Manuals