LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.6L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Camshaft Cover Assemble >> Right Camshaft Cover

Right Camshaft Cover

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Spark Plug Shield Tube Coil Seal
    GM1836411Courtesy of GENERAL MOTORS COMPANY
  1. Install the NEW right spark plug shield tube coil seals using the J 5590  driver (1) and J 24254-A  installer (2) .
  2. Fig 2: View Of Right Camshaft Cover Gasket
    GM1833744Courtesy of GENERAL MOTORS COMPANY
  3. Install the NEW right camshaft cover gasket.
  4. Fig 3: View Of Right Camshaft Cover Bolt Grommets
    GM1836419Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The camshaft cover bolt grommet must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.

  5. Install the NEW right camshaft cover bolt grommets.