Radiator Outlet Pipe Replacement (LFX)

Fig 1: Radiator Outlet Pipe (LFX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Partially drain the cooling system. Refer to Cooling System Draining and Filling . Remove the intake manifold cover. Disconnect the heater hoses from the heater pipes and set aside. Disconnect the radiator outlet hose and set aside.
1	Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 58 N.m (42 lb ft)
2	Bolt Tighten 58 N.m (42 lb ft)
3	Radiator Outlet Pipe Clip
4	Radiator Outlet Pipe Procedure Discard and install a NEW Seal.