Stabilizer Shaft Link Replacement

Fig 1: Stabilizer Shaft Link And Nuts

GM2193066

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheels. Refer to Tire and Wheel Removal and Installation .

1

Front Stabilizer Shaft Nut (Qty:2)

CAUTION:

Refer to Fastener Caution .

NOTE:

Use the appropriate size socket or wrench to hold the ball stud while removing the stabilizer shaft nut.
After the nut has been removed, discard and replace with NEW.

Tighten

Nut at stabilizer shaft - 70 N.m (52 lb ft)
Nut at strut - 70 N.m (52 lb ft)

2

Stabilizer Shaft Link