LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Bolster Replacement (AYF)

Rear Seat Back Bolster Replacement (AYF)

Fig 1: Rear Seat Back Bolster
GM2873702Courtesy of GENERAL MOTORS COMPANY
Rear Seat Back Bolster Replacement (AYF)

Callout Component Name
1 Rear Seat Back Cushion Bolster
WARNING:

Refer to SIR Warning .

Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling
  2. Fold rear seat back cushion down.
  3. Pull the upper area of the seat back cushion bolster forward.
  4. Use a suitable flat-bladed tool to release the retainer from the bolster's retaining bar.
  5. Pull the seat back cushion bolster up to remove it from the rear seat.
  6. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals