LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Interior Paneling >> Repair Instructions >> Center Pillar Upper Trim Panel Replacement (Buick)

Center Pillar Upper Trim Panel Replacement (Buick)

Fig 1: Center Pillar Upper Trim Panel Assembly
GM2787218Courtesy of GENERAL MOTORS COMPANY
Center Pillar Upper Trim Panel Replacement (Buick)

Callout Component Name

Preliminary Procedures

  1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the seat belt tensioner fastener and feed seat belt through center pillar upper trim panel. Refer to Front Seat Belt Anchor Plate Tensioner Replacement .
  3. Remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement (Buick) .
  4. Move the driver or passenger seat to the full forward position.
1 Center Pillar Upper Trim Panel Bolt Cap
2 Center Pillar Upper Trim Panel Fastener
CAUTION:

Refer to Fastener Caution .
3 Center Pillar Upper Trim Panel Assembly

Procedure

  1. Pull the trim panel toward the inside of the vehicle to disengage the retainers.
  2. When replacing the center pillar upper trim panel, feed the seat belt through the panel.
scientia non olet · About LEMON Manuals