Front Grille Replacement (Buick)

Fig 1: Front Grille

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Chevrolet) , Front Bumper Fascia Replacement (Buick) .
1	Radiator Grille Screw (Qty 2) CAUTION: Refer to Fastener Caution .
2	Radiator Grille Procedure Place the bumper fascia face down on a clean protected surface. Using a suitable trim tool, release the thirteen locking tabs while carefully pulling the radiator grille from the front fascia. NOTE: Each individual front bumper fascia tab must be secure to each slot in the radiator grille prior to re-assemble of the fascia to the vehicle.