LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Air Inlet Grille Panel Replacement (Buick)

Air Inlet Grille Panel Replacement (Buick)

Fig 1: Air Inlet Grille Panel
GM2865811Courtesy of GENERAL MOTORS COMPANY
Air Inlet Grille Panel Replacement (Buick)

Callout Component Name

Preliminary Procedure

  1. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement .
  2. Remove the air inlet grille panel extension. Refer to Air Inlet Grille Panel Extension Replacement .
1 Air Inlet Grille Panel Retainer (Qty: 6)
CAUTION:

Refer to Fastener Caution .
2 Air Inlet Grille Panel

Procedure

  1. Disconnect the windshield washer hose.
  2. Lift up the front edge of the air inlet grille panel, slide the grille panel forward from both hood hinges.
  3. Use a suitable tool to carefully release the air inlet grille panel from the windshield.
  4. Transfer parts as needed.
scientia non olet · About LEMON Manuals