LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> DTC B1735, B1740, B1745, B1750, B1755, B1760, B1815, or B1820 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool seat switch parameters listed below change between Inactive and Forward/Rearward or UP/Down when pressing the appropriate seat directional switch.
    • Driver Seat Cushion Front Vertical Switch
    • Driver Seat Cushion Rear Vertical Switch
    • Driver Seat Horizontal Switch
    • If the parameter does not change 

      Refer to Circuit/System Testing below.

    • If the parameter changes 
  3. All OK.
scientia non olet · About LEMON Manuals