Front Bumper Fascia Upper Molding Replacement (Buick)

Fig 1: Front Bumper Fascia Upper Molding

Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Upper Molding Replacement (Buick)

Callout	Component Name
Preliminary Procedure  Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Chevrolet) , Front Bumper Fascia Replacement (Buick) .
1	Front Bumper Fascia Upper Molding Procedure  Place the bumper fascia face down on a clean protected surface. Release the five locking tabs while carefully pulling the front bumper fascia upper molding from the front fascia.