Transfer Case Shift Control Module Replacement

Fig 1: Transfer Case Shift Control Module

GM1835965

Courtesy of GENERAL MOTORS COMPANY

Transfer Case Shift Control Module Replacement

Callout

Component Name

Preliminary Procedure
Remove the knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) , Knee Bolster Replacement (Cadillac) .

1

Transfer Case Shift Control Module

Procedure

Disconnect the electrical connector.
Remove the module from the module bracket by releasing the retaining tabs.
If installing a new module, perform the transfer case shift control module programing and setup. Refer to Control Module References .