Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
The transfer case encoder motor (TCEM) is a bi-directional, permanent magnet, DC motor. When energized, through motor control A or motor control B, the ground is provided by the opposing motor control circuit which becomes grounded through the transfer case shift control module (TCCM) ground circuit. The TCEM, through a series of gears, rotates the transfer case control actuator shaft which moves the transfer case two/four wheel drive actuator cam and transfer case high/low shift fork in order to shift the transfer case between the following modes or ranges:
- 2WD HI
- 4WD Auto
- 4WD HI
- 4WD LO
- Neutral