LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Tahoe LS, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2022 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - DTC P0442 To DTC P3449 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P2632 >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 GMC Yukon XL, 2013 GMC Yukon, 2013 Chevrolet Suburban, 2013 Chevrolet Avalanche, and 2013 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.

The control module enables the secondary fuel pump relay when the ignition switch is turned ON. The control module will disable the secondary fuel pump relay within 2 seconds unless the control module detects ignition reference pulses. The control module continues to enable the secondary fuel pump relay as long as ignition reference pulses are detected. The control module disables the secondary fuel pump relay within 2 seconds if ignition reference pulses cease to be detected and the ignition remains ON.

scientia non olet · About LEMON Manuals