LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Tahoe LS, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2022 (Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - DTC P0442 To DTC P3449 And Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0685, P0689, P0690, or P1682 >> Component Testing

Component Testing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 GMC Yukon XL, 2013 GMC Yukon, 2013 Chevrolet Suburban, 2013 Chevrolet Avalanche, and 2013 Cadillac Escalade EXT. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Depending on the application, the relay coil resistance will be within one of the following ranges.

  1. Test for one of the following resistance specifications between terminals 85 and 86 of the powertrain relay:
    • 70-110 Ω
    • 200-250 Ω
    • If not within the specified range, replace the powertrain relay.
  2. Test for infinite resistance between the following terminals of the powertrain relay:
    • 30 and 86
    • 30 and 87
    • 30 and 85
    • 85 and 87
    • If not the specified value, replace the powertrain relay.
  3. Install a 20 A fused jumper wire between relay terminal 85 and 12 V. Install a jumper wire between relay terminal 86 and ground. Test for less than 2 Ω between terminals 30 and 87.
    • If greater than the specified range, replace the powertrain relay.
scientia non olet · About LEMON Manuals