Front Upper Fascia Support Bracket Replacement
Front Upper Fascia Support Bracket Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Yukon) , Front Bumper Fascia Replacement (Escalade) , Front Bumper Fascia Replacement (Tahoe) , Front Bumper Fascia Replacement (Avalanche) , . |
|
| 1 | Front Upper Fascia Support Bracket Bolt (Qty: 6)
CAUTION:
Refer to Fastener Caution . Tighten 7 N.m (62 lb in) |
| 2 | Front Upper Fascia Support Bracket Assembly TIP: Disconnect the wiring harness retainer from each end if equipped. |