Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0016, P0017, P0030, P0036, P0053, P0054, P0101, P0102, P0103, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0128, P0131, P0132, P0133, P0134, P0135, P0137, P0138, P013A, P013B, P013E, P013F, P0140, P0141, P015A, P015B, P0201, P0202, P0203, P0204, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0300, P0301, P0302, P0303, P0304, P0340, P0341, P0365, P0366, P0411, P0442, P0443, P0446, P0449, P0452, P0453, P0455, P0496, P1248, P1249, P124A, P124B, P2147, P2148, P2150, P2151, P2153, P2154, P2156, P2157, P219A, P2227, P2228, P2229, P2230, P2270, P2271, P2440, or P2444 is not set.
The barometric pressure (BARO) is greater than 70 kPa (10.2 PSI).
The manifold absolute pressure (MAP) is between 0-200 kPa (0-29 PSI).
The intake air temperature (IAT) is between -20°C and +200°C (-4 and +392°F).
The start up engine coolant temperature is warmer than -20°C (-4°F).
The fuel control intrusive diagnostics are not active.
The engine is operating under cruise conditions.
DTC P2096 runs continuously when the conditions above have been met.